Specifications of Wire Rod -

Steel Wire Rod : SWRY 14 LC (Low Carbon), 5.5 mm Diameter Chemistry as under (%) :

C	:	0.08 to 0.14
Mn	:	0.40 to 0.50
P	:	0.04 to 0.050
S	:	0.035 to 0.050
Si	:	0.10 to 0.20

UTS (N/NM2 max): 410 to 450
R.A. (% Min) : 84 %
Coil Wt : 1100 kg (Bundle of two Coils)
Coil Length : 4864 mtrs.( Bundle of two coils)

For trade inquiry, please contact :

M/s. N.R. Wires Private Limited
20 Light Industrial Area,
Bhilai – 490 026 (Chhattisgarh)
Ph: +91 788-2286927, 2286254, 4088999(O)
Fax: +91 788-2382400, 2282400
Mobile: +91 9826393940 (Sh. Sandeep Agrawal),
+91 9826157029 (Sh. N.R. Agrawal),
+91 9826134443 (Sh. Sanjay Agrawal)
Email: nrwires@sify.com

No Twist Block Technology
PRAKASH TMT bar is manufactured using “No Twist Block Technology” to maintain better surface finish as desired in TMT bars. In this technology, conventional Cast Iron roll with pass life of 50 to 70 Tons are replaced with Tungston Carbide rings having pass life of 600 to 700 Tons with super finish surface of the TMT bar. PIL is the first manufacturer after SAIL and TATA manufacturing of TMT bars in Block mill.

The advantages of “No Twist Block Technology” includes the following:

Product will be stable, uniform and free from any type of scale Through Bloch Technology we are able to control the same depth of rib for whole production / section of TMT Bar Extra shining of TMT bars will be resulted from the technology On spot setting not required Section control is simple Maintenance Frequency is low Final speed can go upto 80 meter/sec

Properties
“PRAKASH” TMT bars has following Properties :-
Earthquake Resistance: “PRAKASH” TMT bars strength and ductility are sufficient to make it earthquake resistant. With a yield strength ranging from 415 N/mm2 to 500 N/mm2, “PRAKASH” TMT ensures the required strength for a safe home.

Corrosion Resistance:Controlled water cooling prevents the formation of the carbide which has been cited as a main cause for corrosive nature of the TMT bars. “PRAKASH” TMT ensures the required corrosion resistance through its manufacturing process.

Strain Aging: Due to unique manufacturing process and chemical composition, “PRAKASH” TMT bars shows no tendency of embitterment either through welding or cold deformation of the welding joints.

Bendability: Tough outer surface and soft core of the “PRAKASH” TMT make the TMT bars bendable and ideal for construction.

Fire Resistance:As compared to Tor steel, “PRAKASH” TMT bars have high thermal stability and therefore can withstand on elevated temperatures.

Weldability: “PRAKASH”TMT bars can be used for butt and other welded joints without reduction in the strength at the welded joints..

Quality Assurance
With customer oriented approach, it has become imperative to maintain strict quality management, while manufacturing TMT bars and therefore PIL is committed to quality management throughout the manufacturing process. Company's in-house Quality Assurance Division is fully equipped to test various raw materials and products to ensure the desired quality parameters. The activities of the quality assurance division are governed by skilled metallurgist and technicians who are involved in thorough inspection of the products and raw materials to minimize the chances of error. Sophisticated testing facilities, commitment to excellence and continuous improvement has enabled the company to produce best quality TMT bars.